Bore:
Stroke:
Rod Length:
Pin Offset:
Compression Ratio:
Intake Info
Int. Valves Per Cylinder:
Int. Valve Diameter:
Int. Runner Length:
Begin Runner Area:
Minimum Port Area:
Average Taper Angle:
Cylinder Head Info
Enter the type of head you're using below
Type of Cylinder Head
Stock
GT-40
Canfield Stage 1
Canfield Stage 2
Canfield Stage 3
Dart Windsor Jr
Dart Windsor
Edelbrock Performer
Edelbrock Victor Jr.
Edelbrock Victor
TFS Street Heat
TFS Twisted Wedge
Other - Please Specify Below
If Other, Enter Name
If you have them, please
enter
Intake Test Depression:
Intake Test Valve Dia:
Int. Flow @ 0.050" Lift:
Int. Flow @ 0.100" Lift:
Int. Flow @ 0.200" Lift:
Int. Flow @ 0.300" Lift:
Int. Flow @ 0.400" Lift:
Int. Flow @ 0.500" Lift:
Int. Flow @ 0.600" Lift:
Int. Flow @ 0.700" Lift:
If you have them, please
enter
Exhaust Test Depression:
Exhaust Test Valve Dia:
Exh. Flow @ 0.050" Lift:
Exh. Flow @ 0.100" Lift:
Exh. Flow @ 0.200" Lift:
Exh. Flow @ 0.300" Lift:
Exh. Flow @ 0.400" Lift:
Exh. Flow @ 0.500" Lift:
Exh. Flow @ 0.600" Lift:
Exh. Flow @ 0.700" Lift:
Camshaft Info
Camshaft Follower:
Hydraulic Roller
Hydraulic Flat Tappet
Solid Roller
Solid Flat Tappet
Camshaft Model:
Stock
E303
F303
X303
Other - Please Specify Below
Intake Gross Valve Lift:
Intake Opening:
Intake Closing:
Intake Centerline:
Intake Valve Lash:
Intake Rocker Ratio:
Exhaust Gross Valve Lift:
Exhaust Opening:
Exhaust Closing:
Exhaust Centerline:
Exhaust Valve Lash:
Exhaust Rocker Ratio:
Exhaust Info
Exh. Valves Per Cylinder:
Exh. Valve Diameter:
Minimum Port Area:
Pipes Per Cylinder:
Header Pipe Length:
Header Pipe Inlet Dia.:
Header Pipe Exit Dia.:
Header Pipe Taper Angle:
Collector Length:
Collector Inlet Dia.:
Collector Exit Dia.:
Collector Taper Angle:
Fuel Info
Air/Fuel Ratio:
Supercharger:
None
Blower
Turbo
Nitrous
Type:
Multipe Cylinders Per Carb/TB
Single Cylinder Per Carb/TB
Number of Carbs/TB's:
1
2
3
4
5
6
7
8
Rated CFM:
Carb/TB Test Pressure:
