|
|
[
Contents |
Search |
Post New ]
[ Reply | Next | Previous | Up ] |
Category: SlowGT Technology & Performance
Remote Name: 204.134.5.17
Remote User: slowgt
Date: Friday, April 06, 2001
Time: 08:20:19 AM
We had the same problem a few years ago. The mass-air meter calibration was incorrect. However, there are a number of problems that could cause this behavior. Usually this is caused either by ignition timing or fuel problems. Check your timing first (the easy thing to check) and then look at the fuel system. You should also check the valve lash (or pre-load for hydraulic lifter applications). If the pre-load is excessive the exhaust valve can be held open and cause this type of problem.
This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600
resolution
or larger with 4.0 browsers or higher.
All rights reserved. ASR Corporation 2000. http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT
webmaster
Last Updated: April 06, 2001
5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing
