|
|
[
Contents |
Search |
Post New ]
[ Reply | Next | Previous | Up ] |
Category: 5.0 Mustangs
Remote Name: 207.50.25.154
Remote User: lenh
Date: Thursday, March 15, 2001
Time: 06:03:04 PM
i have been figuring my compression ratio and i also went to silvolite pistons website and they are a lot differnt from what i figured,let me tell you what i have and maybe someone has this setup can advise me approx what compression ratio is.The heads are 68cc compression chambers,using victor reinz head gasket the block is a 95 model roller cam block and has not had any deck milling it has only been bored .030 over i cam up with approx 9.0 to 1 the website says just under 8.0 to 1 by the way the pistons are silvolite 1177's they have 4 valve reliefs thanks
This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600
resolution
or larger with 4.0 browsers or higher.
All rights reserved. ASR Corporation 2000. http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT
webmaster
Last Updated: March 15, 2001
5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing
