|
|
[
Contents |
Search |
Post New ]
[ Reply | Next | Previous | Up ] |
Category: SlowGT Technology & Performance
Remote Name: 204.134.5.66
Remote User: slowgt
Date: Friday, January 12, 2001
Time: 07:26:46 AM
I think the lift specs you give here are actually the lobe centerlines. However, for any reasonable lift (< 0.550), a 216 duration cam should not present a clearance problem. The piston-valve clearance should always be checked when a cam is changed. Use a dial indicator on the valve retainer with a "test" spring installed or remove the head and use the clay method.
Mike
This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600
resolution
or larger with 4.0 browsers or higher.
All rights reserved. ASR Corporation 2000. http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT
webmaster
Last Updated: January 12, 2001
5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing 5.0 liter Mustang drag racing
