Go to SlowGT Home

[ Contents | Search | Post New ] [ Reply | Next | Previous | Up ]

Main Stud Girdle
SlowGTOnLine

Category: SlowGT Performance & Technology
Remote User: aslow306
Date: Monday, May 07, 2001
Time: 11:21:23 PM

Comments

I was wondering if I could get the number to the place you purchased your stud girdle? The problem I have been facing is many today don't require main cap mod's but I have added Pro-gram billet caps to a 69 block on the 2,3,4 caps and those type of girdles won't work due to now the middle caps are diff. height and width than the stockers. Plus due you recommend Aluminum over the steel? I have heard that the steel can cause the rear to crack sooner due to steel not being able to absorb the harmonics like the aluminum? Thanks in advance Patrick

This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600 resolution or larger with 4.0 browsers
or higher. All rights reserved.  ASR Corporation 2000.  http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT webmaster.
Last Updated: May 07, 2001