Go to SlowGT Home

[ Contents | Search | Post New ] [ Reply | Next | Previous | Up ]

Re: 347's
SlowGTOnLine

Category: SlowGT Performance & Technology
Remote User: slowgt
Date: Wednesday, December 06, 2000
Time: 07:46:42 AM

Comments

I assume you are referring to a 347 stroker kit. The bottom of the cylinders need to be machined for rod clearance. Also, a piece of metal near the oil pump mount needs to be removed. This work can be done by hand with a die grinder and a carbide bit.

Mike

This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600 resolution or larger with 4.0 browsers
or higher. All rights reserved.  ASR Corporation 2000.  http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT webmaster.
Last Updated: December 06, 2000