Go to SlowGT Home

[ Contents | Search | Post New ] [ Reply | Next | Previous | Up ]

Re: Ecu can't control engine
SlowGTOnLine

Category: SlowGT Performance & Technology
Remote User: slowgt
Date: Tuesday, November 07, 2000
Time: 07:26:36 AM

Comments

Leestang1,

Most of our experience has been with the Ford Motorsport extender and the Extreme Performance Engine Computer (EPEC). Both work very well with the Extender being much easier to use. The EPEC requires a computer to progam it. I have heard very good things about the Programmable Management System (PMS). It aparantly is very easy to use and does not require a computer to program. The DFI type systems (Accell or Speed-Pro) are very difficult to program without a dyno and a very experienced tuner.

Mike

This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600 resolution or larger with 4.0 browsers
or higher. All rights reserved.  ASR Corporation 2000.  http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT webmaster.
Last Updated: November 07, 2000