Go to SlowGT Home

[ Contents | Search | Post New ] [ Reply | Next | Previous | Up ]

Re: Rearend Problem
SlowGTOnLine

Category: SlowGT Performance & Technology
Remote User: slowgt
Date: Tuesday, October 24, 2000
Time: 09:29:06 AM

Comments

Eric,

I have seen your problem before. The differential side shims that you describe should only be used to determine the proper shim thickness. After the thickness is determined, solid shims should be purchased from Ford to replace the “shim pack”. Another alternative is to buy an adjustable shim kit from Reider Racing. I have used Reider shim pack successfully many times. The Reider kit employs a center sleeve to prevent the shims from separating. The latter approach is probably easier since Ford dealers (usually) don’t keep the side shims in stock. Your gears should be OK.

Mike

This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600 resolution or larger with 4.0 browsers
or higher. All rights reserved.  ASR Corporation 2000.  http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT webmaster.
Last Updated: October 25, 2000