Go to SlowGT Home

[ Contents | Search | Post New ] [ Reply | Next | Previous | Up ]

Re: mass air conversion
SlowGTOnLine

Category: SlowGT Performance & Technology
Remote User: slowgt
Date: Tuesday, October 24, 2000
Time: 09:19:10 AM

Comments

Dave,

Conversion from a speed-density system to a mass-air system is fairly simple. The following items are required :

1) Mass-air computer (from an 89 - 93 mustang) 2) Mass-air meter cable 3) Mass-air meter (Bullet or Pro-M).  BTW, there are about 8 good pages of dyno and flow data on various mass-air sensors in the 5.0 Liter Ford Dyno Tests book.

The computer can be obtained from a salvage yard. I got mine from Anderson Motorsport. The Mass-air cable can be obtained from Anderson or Best Products (Pro-M). The cable is installed into the stock computer connector. This must be done very, very carefully. Follow the instructions that come with the cable. The vacuum line connecting the intake manifold to the MAP (on the firewall) must also be disconnected.

Mike

This web site is dedicated to 5.0 Liter Mustang Drag Racing.
The technical information on this site is provided based on the owners personal experience.
No warranty is expressed or implied. Best viewed at 800x600 resolution or larger with 4.0 browsers
or higher. All rights reserved.  ASR Corporation 2000.  http://www.slowgt.com
Questions and comments about this site should be directed to the SlowGT webmaster.
Last Updated: October 25, 2000